Features:
- Gland less and leakage free teflon faced Diaphragm
- Electromechanical solenoid driven by robust electronic pulser
- Excellent dosage linearity
- Adjustable injection frequency (100 SPM)
- Adjustable volume displacement via stroke length knob.
- Special G.F.P.P. Long life housing
- Teflon faced Hypalon DIAPHRAGM for long lasting service
- Wide range of liquid ends - PP/PVC/SS316/PTFE
- Low Power Consumption
Standard Accessories
- L.D.P.E. Tubing
- Spring loaded injection check valve & Foot valve
Optional Accessories
- H.D.P.E. Chemical Storage Tank
- F.R.P. Chemical Storage Tanks with low level Float Switch
Installation & Operation
- Fix the pump securely in a safe location away from sunlight, sources of heat and other dangerous environs, allowing for a maximum suction lift of 1 Metre only
- Cut the supplied tubing into a 1 Metre length and connect one of its ends to the suction of the pump and other to the foot valve
- Ensure the suction tubing is held straight within the chemical storage tank
- Connect the rest of the required length of tubing to the discharge side of the pump head
- Connect the NRV in a vertical position in the required injection point
- Position the discharge tube above the pump head in a safe direction
- Plug in the Mains Chord of the pump to a single phase 230vAC, 5Amp Socket
- Wait for the pump to prime into the head
- As soon as the liquid starts to flow out of the tube turn off the pump promptly now and connect the fully primed tube into the NRV
- Turn the pump on again and check for leaks in all areas
- Now finally adjust the speed buttons as per your dosing requirement
Specifications
| MODEL |
MAX CAPACITY LPH |
MAX PRESSURE KG/CM2 |
END CONNECTION |
VA/VA MP |
1
2
5
6
12 |
12
10
5
4
1 |
LDPE Tubing 3/8" x 1/4" |
Features:
- Gland less and leakage free teflon faced Diaphragm
- Electromechanical solenoid driven by robust electronic microprocessor pulser
- Excellent dosage linearity
- Fine adjustment of stroke speed & stroke length upto 1spm, max 99 spm
- Adjustable volume displacement via stroke length knob.
- Special G.F.P.P. Long life housing
- Prevision for Low voltage / High voltage cut off
- Integrated low level cut-off switch (Optional)
- Teflon faced Hypalon DIAPHRAGM for long lasting service
- Low Power Consumption
- Wide range of liquid ends - PP/PVC/SS316/PTFE
Standard Accessories
- L.D.P.E. Tubing
- Spring loaded injection check valve & Foot valve
Optional Accessories
- H.D.P.E. Chemical Storage Tank
- F.R.P. Chemical Storage Tanks with Low Level Float Switch
Installation & Operation
- Fix the pump securely in a safe location away from sunlight, sources of heat and other dangerous environs, allowing for a maximum suction lift of 1 metre only.
- Cut the supplied tubing into a 1 metre section and connect one of its ends to the suction of the pump and other to the foot value.
- Ensure the suction tubing is held straight within the chemical storage tank.
- Connect the rest of the required length of tubing to the discharge side of the pump head.
- Connect the NRV in a vertical position in the required injection point
- Position the discharge tube above the pump head in a safe direction
- Plug in the mains chord of the pump to a single phase 230vAc, 5amp socket.
- Wait for the pump to prime into the head.
- As soon as the liquid starts to flow out of the tube turn off the pump promptly now connect the fully primed tube into the NRV.
- Turn the pump on again and check for leaks in all areas.
- Now finally adjust the speed buttons as per your dosing requirement.
Specifications
| MODEL |
MAX CAPACITY LPH |
MAX PRESSURE KG/CM2 |
END CONNECTION |
VA/VA MP |
1
2
5
6
12 |
12
10
5
4
1 |
LDPE Tubing 3/8" x 1/4" |
